Methods To Solve The Problem Of Paint Peeling In Your Bathroom

Peeling paint is a common and severe problem for your bathroom ceiling and walls. It appears because there is always high humidity and also sometimes water leaks. It can also happen because the paint was applied over soap and water built up scum. Peeling paint can ruin a beautiful and attractive bathroom, but it can also be a home for bacteria and mildew. The repair process can take some time, but it is not as difficult as you may think. The important thing is that you work carefully so that it won’t happen again.


Steps To Consider When You Start The Repairing Process

There are a few important steps you should follow carefully if you want the job done perfectly:


  1. Remove chipped or peeling paint

Use a paint scraper or a putty knife to remove the peeled paint, but be careful with the loose edges. You should clean up until you have only parts with firmly adhered paint. Use a trash can or any other recipient to catch the chips of loose paint and make sure you have a drop cloth on the floor to be able to clean the missed flakes. You should not do this without wearing a dust mask and protective eyewear otherwise, you can inhale those particles or get them in your eyes.


  1. Patch the places that have peeling paint

When you have finished removing the chipped paint, you will end up with uneven areas because some of them have no paint at all and some have one or more layers of paint. You now have to create a smooth surface in order to repaint. You should choose a patching compound that is quick-setting and start applying on that layer. Even the layer with a broad or putty knife and after it dries, you may apply another one if it is needed. You should finish the patching process with an all-purpose drywall compound layer and let it dry overnight.


  1. Sand

When the patched areas dried, you should use sandpaper to sand them and make sure there are no uneven edges or ridges. On the ceiling, you should use a vacuum that has a sanding attachment and a dust collecting bag because the sanding process will make a lot of dust. Do not forget to use the protective gear.


  1. Prime the wall or ceiling

The priming process is very crucial. If the walls and ceiling are not perfectly primed, the peeling paint will appear again. To ensure you will not have to do this once more, you should buy an oil-based primer that has stain-blocking properties and uses it before the painting job. The primer prevents the patching compound to get wet and also the appearance of watermarks on the ceiling and walls.


  1. Repaint the wall or ceiling

When the primer has dried, you can start to repaint your bathroom walls and ceiling, but be careful what paint you buy. It should be one that is specially marked for bathroom use because it has a semigloss or high-gloss finish, it can resist to humidity better than other types of paint and you can easily wash the walls.


If you follow these steps carefully, the repair process can take you a few days, but your bathroom will look brand new and the peeling paint problem will be forever gone.

Categorised in:

Leave a Reply

Your email address will not be published. Required fields are marked *